FDEB6

FREE UK Shipping (for 24/48 hour deliveries please call 01482 460933)

You may select your delivery dates that co-inside with your installation date at the checkout.  If you require a quote on installation services please call 01482 460933 or use the contact form on this website

Description

Kingspan FDEB6 - BSEN 40mm x 600mm x 600mm with Polyflor SD. This loose laid system is fully tested to the requirements of the European Standard for raised access floors BSEN12825. The design incorporates a full depth edge band which provides encapsulation of the chipboard core, this also provides protection to the edge of the surface finish.

These panels are based upon a 600mm module constructed around a high performance chipboard core. The top and bottom surfaces are laminated with galvanised steel sheet. The panels are engineered to fine dimensional tolerances for modular control. The specified surface finish is then laminated to the top surface before being trimmed to fit flush with the panel sides. Electrical continuity and static dispersion is provided where required.

* Tested in accordance with European Standard BS EN12825 for raised access floors.

* Finished floor heights from 60mm to 1200mm are available using one of our standard pedestals. For heights outside of this range alternative pedestals are available.

* The classifications given are based on the use of the Kingspan range of pedestals.

* Uniformly distributed loads do not form part of EN12825 and are therefore indicative ONLY.